The Nano Station 2 is a new CPE router from Ubiquiti Networks (UBNT)
Product Specifications:
- Processor Specs: Atheros AR2316 SOC, MIPS 4KC, 180MHz
- Memory Information: 16MB SDRAM, 4MB Flash
- Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
- Wireless Approvals: FCC Part 15.247, IC RS210
- RoHS Compliance: Yes
- TX Power: 26dBm, +/-2dB
- RX Sensitivity: -97dBm +/-2dB
- Antenna: Integrated 10dBi Dual Pol + External SMA
- Outdoor Range: over 15km
- TCP/IP Throughput: 25Mbps+
- Max Power Consumption: 5 Watts
- Power Supply: 12V, 1A (12 Watts). Supply and injector included
- Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
- Operating Temperature: -20C to +70C (System PCB optimized for hi-temp)
- Operating Humidity: 5 to 95% Condensing
- Shock and Vibration: ETSI300-019-1.4
- Weight: 0.4 kg
The Metrix has some pictures of the insides.
Openness:
The big brother to the nanostation, the powerstation runs OpenWRT kamikaze as well as the UBNT supplied AirOS. Since the nanostation is a similar platform, it should not take long for an OpenWRT port. It has a serial port pinned out, and a JTAG adaptor clearly marked on the board.
