AP in client mode problems

[Bryan Irvine]

> It almost sounds like the AP in client mode can only deal with one MAC
> address at a time. An easy way to deduce this would be to put both
> machines behind a device running NAT and stick that behind the client
> mode AP. If they both work when behind the NAT device then its
> obviously a layer2 problem with the client mode AP.  Have you checked
> to make sure that both devices are running the latest firmware? It
> sounds like a firmware bug or short coming to me.

They are running the latest firmware, I just upgraded that a couple weeks ago.

I have a spare box I can set up as a nat device I'll give that a go as well.


--Bryan