Fwd: [Orinoco-users] Monitor Mode with Agere Firmware 7.xx and 8.xx

[Matt Westervelt]

Ubiquiti SRC is pretty cool. Atheros (madwifi-ng), 300mw on b/g, 100mw
on 802.11a.

We just put em on sale too.

http://metrix.net/ubiquiti-networks-src-p-4.html

-matt


Eric Pretorious wrote:
> FWIW: The YDI Diamond is just a re-branded Orinoco Classic Silver. I checked the manufacturer's web site (http://www.ydi.com == http://www.proxim.com) and, apparently, the most current release of the firmware is version 8.72. I suppose that I should just start looking for a non-Orinoco PCMCIA card with external antenna connector.
> 
> Thoughts? Recommendations?
> 
> Eric Pretorious
> Sunnyvale, CA
> 
> Eric Pretorious <epretorious at yahoo.com> wrote: I just discovered that my YDI Diamond PCMCIA card doesn't work with version 0.15 of the Orinoco code - Firmware versions 7.XX and 8.XX are not supported by the Orinoco code. (It worked just fine with *patched* versions of the earlier code, though.)
> 
> Thoughts? Suggestions?
> 
> Eric Pretorious
> Sunnyvale, CA
> 
> Eric Pretorious <epretorious at yahoo.com> wrote: Date: Fri, 20 Apr 2007 18:48:07 -0700 (PDT)
> From: Eric Pretorious <epretorious at yahoo.com>
> To: orinoco-users at lists.sourceforge.net
> Subject: [Orinoco-users] Monitor Mode with Agere Firmware 7.xx and 8.xx
> 
>  A long time ago I used to use my YDI Diamond card...
> 
>> [epretorious at localhost ~]$ /sbin/pccardctl ident
>> Socket 0:
>>   product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
>>   manfid:  0x0156, 0x0002
>>   function: 6 (network)
> 
> ...with Kismet. I applied the Orinoco Monitor Mode Patch to the Orinoco sources, compiled, and - Viola! - everything worked. But now that the Orinoco Driver includes the patch, I can't use my YDI Diamond card.
> 
>> Changes compared with the latest stable release (0.13e):
>>
>>     * Monitor mode support (except Agere firmware 7.xx and 8.xx).
> 
> I had to use three different distro's (Mandriva 2007, Ubuntu 6.10, and *finally* BackTrack2) before I discovered the root cause:
> 
>> [epretorious at localhost ~]$ dmesg | tail -20
>> pcmcia: registering new device pcmcia0.0
>> orinoco 0.15 (David Gibson  <hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
>> orinoco_cs 0.15 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
>> eth2: Hardware identity 0001:0001:0004:0002
>> eth2:  Station identity  001f:0001:0008:0034
>> eth2: Firmware determined as Lucent/Agere 8.52
>> eth2: Ad-hoc demo mode supported
>> eth2: IEEE standard IBSS ad-hoc mode supported
>> eth2: WEP supported, 104-bit key
>> eth2: MAC address 00:02:2D:B5:8A:E0
>> eth2: Station name "HERMES I"
>> eth2: ready
>> eth2: orinoco_cs at 0.0, irq 3, io 0x5100-0x513f
>> eth2: Monitor mode support is buggy in this firmware, not enabling
>> ADDRCONF(NETDEV_UP): eth2: link is not ready
>> eth2: New link status: Connected (0001)
>> ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>> eth2: Monitor mode support is buggy in this firmware, not enabling
>> eth2: no  IPv6 routers present
>> eth2: Monitor mode support is buggy in this firmware, not enabling
> 
> (Neither of the other two distro's reported the card's firmware. Why?)
> 
> How can I get back to mapping networks?
> 
>  1. I can compile from source (if  I REALLY have to) - Is there some way to revert to the old patch? i.e., The one that supported my YDI Diamond card?
>  2. I could just buy a different card with the newer firmware - Is there a list of Orinoco cards that have the newer firmware?
>  3. I could just buy a different card with a different chipset - Is there a list of PCMCIA cards with external antenna connectors that support monitor mode?
> 
> Eric Pretorious
> Sunnyvale, CA
>            
> 
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
>  Check out new cars at Yahoo! Autos. -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/_______________________________________________
> Orinoco-users mailing list
> Orinoco-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/orinoco-users
> _______________________________________________
> Talk mailing list
> Talk at seattlewireless.net
> http://seattlewireless.net/mailman/listinfo/talk
> 
> 
>        
> ---------------------------------
> Ahhh...imagining that irresistible "new car" smell?
>  Check outnew cars at Yahoo! Autos.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Talk mailing list
> Talk at seattlewireless.net
> http://seattlewireless.net/mailman/listinfo/talk